Trasduttore Gems Sensor 3A Sanitary Pressure Transducer serie 290
ALLEGATI:
For Clean-In-Place (CIP) and Sterilise-In-Place (SIP)
0.20% full scale accuracy
No liquid fill diaphragms
The 290 Series meets 3A sanitary design standards and is fully sealed to withstand
external high pressure washdowns. These units are packaged in rugged welded
stainless steel housings and are exceptionally insensitive to vibration, shock and
environmental extremes. A small size and tri-clover sanitary pressure fitting allow
direct mounting in most CIP and SIP installations. Other features include IC-based
circuitry, a 1/2” NPT conduit fitting and shielded cable with vent tube. Sealed
screws provide access to zero and span adjustments.
SPECIFICHE TECNICHE
Input
Pressure Range 1 to 1000psig
Proof Pressure See ordering chart
Burst Pressure See ordering chart
Fatigue Life >1 million cycles
Performance
Output 4-20mA (2 Wire)
Supply Voltage (Vs) 18-38Vdc
Accuracy 0.20%FS
Thermal Error Zero .036%FS/°C (.02%FS/°F)
Thermal Error Span .036%FS/°C (.02%FS/°F)
Compensated Temperatures -7°C to +80°C (20° to 180°F)
Operating Temperatures -40°C to +125°C (-40° to +260°F)
Storage Temperatures -54°C to +127°C (-65° to +260°F)
Zero Tolerance 1%FS (±0.5mA adjustable)
Span Tolerance 1%FS (±0.5mA adjustable)
Maximum Loop Resistance (Vs-18) x 50
Response Time 10ms
Mounting Effects .15%FS (.25%FS for 1.5″ Tri-Clover)
Mechanical Configuration
Pressure Port 1.5” or 2” Tri-Clover Sanitary Fitting
Wetted Parts 316 Stainless Steel, 20 Rc finish
Electrical Connection 1/2” NPT Conduit Fitting and Strain Relief wit
15ft. Cable
Enclosure Stainless Steel
Vibration 10g Peak Sinusoidal, 50 to 1000Hz
Acceleration 10g
Shock 50g
Approvals Meets 3-A Sanitary Standards
Weight 230gms
For Clean-In-Place (CIP) and Sterilise-In-Place (SIP)
0.20% full scale accuracy
No liquid fill diaphragms
The 290 Series meets 3A sanitary design standards and is fully sealed to withstand
external high pressure washdowns. These units are packaged in rugged welded
stainless steel housings and are exceptionally insensitive to vibration, shock and
environmental extremes. A small size and tri-clover sanitary pressure fitting allow
direct mounting in most CIP and SIP installations. Other features include IC-based
circuitry, a 1/2” NPT conduit fitting and shielded cable with vent tube. Sealed
screws provide access to zero and span adjustments.
SPECIFICHE TECNICHE
Input
Pressure Range 1 to 1000psig
Proof Pressure See ordering chart
Burst Pressure See ordering chart
Fatigue Life >1 million cycles
Performance
Output 4-20mA (2 Wire)
Supply Voltage (Vs) 18-38Vdc
Accuracy 0.20%FS
Thermal Error Zero .036%FS/°C (.02%FS/°F)
Thermal Error Span .036%FS/°C (.02%FS/°F)
Compensated Temperatures -7°C to +80°C (20° to 180°F)
Operating Temperatures -40°C to +125°C (-40° to +260°F)
Storage Temperatures -54°C to +127°C (-65° to +260°F)
Zero Tolerance 1%FS (±0.5mA adjustable)
Span Tolerance 1%FS (±0.5mA adjustable)
Maximum Loop Resistance (Vs-18) x 50
Response Time 10ms
Mounting Effects .15%FS (.25%FS for 1.5″ Tri-Clover)
Mechanical Configuration
Pressure Port 1.5” or 2” Tri-Clover Sanitary Fitting
Wetted Parts 316 Stainless Steel, 20 Rc finish
Electrical Connection 1/2” NPT Conduit Fitting and Strain Relief wit
15ft. Cable
Enclosure Stainless Steel
Vibration 10g Peak Sinusoidal, 50 to 1000Hz
Acceleration 10g
Shock 50g
Approvals Meets 3-A Sanitary Standards
Weight 230gms
| Marchi | GEMS SENSORS |
|---|